Preview build — sample projects, stock photography and sample reviews will be replaced with genuine Brellon content before launch.
Request a Quote

Plastering Tips

Planning to Redecorate? Find Out What Your Walls Need Before Painting

Interior wall preparation and plastering before painting

Painting

You have chosen the paint, started planning the room and perhaps booked a decorator. Then you look more closely at the walls: old repairs show through, removing wallpaper has exposed rough patches, or cracks have appeared around a doorway.

Before spending money on decorating, it helps to establish what those surfaces actually need.

Preparing walls for painting might involve straightforward decorating preparation, a few local plaster repairs, a fresh skim or more extensive plastering. The right approach depends on the condition of the existing wall and the finish you want to achieve.

The same questions apply whether you are refreshing your home, preparing a rental property between tenancies or refurbishing an office or shop. You want a good result, a clear scope of work and a realistic programme.

Brellon’s plastering services can help you establish which areas need attention before decoration begins.

Do Your Walls Need Plastering Before Painting?

Not every wall needs new plaster before it can be painted.

If the existing plaster is secure, dry and reasonably smooth, your decorator may only need to clean the surface, address minor imperfections and prepare it for the chosen paint system.

More noticeable damage changes the decision. A wall covered in shallow marks might benefit from skimming, while a few deeper holes could need local repairs. Loose or extensively deteriorated plaster may require more substantial work.

Use the following as a starting point for a discussion with your contractor:

What you can seeWhat may be appropriate
A sound, smooth wall with a few small marksNormal decorating preparation and minor filling
Isolated holes, damaged corners or channels left by electrical workLocal plaster repairs
Secure plaster with widespread shallow imperfectionsPreparation and skimming
Loose, crumbling or extensively damaged plasterRemoval of affected material and more extensive plastering
Major dips or unevennessBackground correction before the finishing stage
Damp patches or cracks that keep returningInvestigation of the cause before agreeing repairs

These are possible routes, rather than a diagnosis. Similar-looking defects can have different causes, and photographs may not reveal the condition beneath the surface.

Start With the Condition of the Wall

Before requesting a quotation, note what you can see and what has happened in the room.

Have you recently removed wallpaper? Has there been a leak? Were cables or pipes installed? Have previous repairs become visible again?

A useful initial record includes:

  1. Wide photographs showing the whole wall.
  2. Close-ups of cracks, holes, staining or damaged areas.
  3. Details of previous leaks or recurring defects.
  4. The approximate size of the room and affected surfaces.
  5. Your intended finish and preferred decorating date.

You do not need to identify the repair method yourself. Describing the problem clearly helps your contractor assess the likely scope and decide whether a site visit is needed.

Walls After Wallpaper Removal

Wallpaper can hide old repairs, shallow scratches and uneven finishes. Once it is removed, the wall may look worse than expected without necessarily needing a complete replaster.

The important questions are whether the underlying plaster is secure and whether ordinary decorating preparation can achieve the appearance you want.

A few isolated imperfections may be manageable locally. Where marks and patches extend across otherwise sound walls, skimming may be worth discussing.

Avoid booking the final painting stage before the newly exposed surfaces have been assessed.

When Local Plaster Repairs May Be Enough

A damaged area does not automatically mean the whole room needs replastering.

Local plaster repairs may be appropriate for holes, broken corners, damaged sections around fittings or channels left after electrical and plumbing work. The surrounding plaster needs to be suitable for the proposed repair.

For a landlord preparing a property between tenancies, this could mean repairing damage in one room while retaining sound finishes elsewhere. In a commercial space, the work might involve making good around altered sockets, removed fixtures or a changed partition.

Ask how the repaired area will meet the surrounding surface. Differences in texture or existing decoration can affect the final appearance, and repainting the whole wall may produce a more consistent result than touching in the patch.

If you are unsure how extensive the work needs to be, read Should You Repair or Replaster Your Walls? Signs to Look For.

When Skimming Can Improve the Finish

Skimming applies a thin finishing layer over a suitable background. It can improve the appearance of sound walls with widespread surface imperfections.

You might consider wall and ceiling skimming when:

  1. Old repairs leave an inconsistent appearance across the wall.
  2. Wallpaper removal has exposed widespread shallow marks.
  3. The existing plaster is secure but the surface needs refreshing.
  4. Suitable new plasterboard requires a plaster finish.

Skimming is principally a finishing process. It cannot secure loose plaster underneath or correct every substantial dip in a wall.

If your main concern is how the surface will look under new lighting, explain that before the work is agreed. A room with strong light across a feature wall may need a different discussion about finish expectations from a utility room.

Plastering vs Skimming: What Is the Difference?

Skimming is a type of plastering. The distinction usually being discussed is between improving a suitable surface and carrying out deeper work before that finish can be applied.

More extensive plastering may involve removing failed material, repairing the background and building up a suitable plaster system. Skimming provides the finishing layer over a background that can support it.

For your project, the useful question is:

Does the wall mainly need a smoother surface, or does the material beneath that surface need attention too?

A quotation should explain the preparation and repair work involved, rather than simply describe everything as “plastering”. This makes it easier to understand the proposed approach and compare contractors’ quotations fairly.

When More Extensive Plastering May Be Needed

Some walls need work beyond local patching or a fresh finish.

Loose sections, deep deterioration, exposed masonry and substantial unevenness may require a more extensive approach. This does not necessarily mean stripping every wall in the room. The scope should reflect the condition of each affected area.

For larger renovations, refurbishment plastering can be planned alongside alterations, replacement fittings and other building work. Agreeing the sequence early helps avoid completing a surface that another trade then needs to disturb.

Older properties also need consideration of their existing materials. Tell your contractor if the building has traditional plasterwork or known previous repairs so that compatibility can be assessed.

What About Damp or Recurring Cracks?

A new surface finish will not resolve an ongoing leak or the underlying cause of repeated cracking.

Explain the history of the problem before repairs are agreed. Where the cause is uncertain, suitable investigation may be needed before plasterwork begins.

Cracks associated with continuing movement or other building defects may require assessment by an appropriately qualified professional. The aim is to establish a suitable repair approach before you invest in redecorating.

Include Ceilings in Your Redecoration Plan

Ceilings are easy to overlook while you are concentrating on wall colours.

Check for staining, damaged patches, visible previous repairs and areas affected by earlier alterations. If ceiling repairs are needed, agreeing them alongside the wall work can help you plan access, room clearance and the order of decoration.

Mention any history of leaks or recurring cracking. Ceiling damage should be assessed before deciding whether local repair, further preparation or a different scope is appropriate.

What Affects the Cost of Preparing Walls for Painting?

The size of the room matters, but it is only part of the quotation.

Other factors include:

  1. How much existing material needs preparation or removal.
  2. The number and depth of damaged areas.
  3. Whether the work involves walls, ceilings or both.
  4. Access, ceiling height and working space.
  5. Protection of furniture, fittings and adjoining areas.
  6. Waste removal arrangements.
  7. The specified finish and wider refurbishment programme.

A low price for a skim is difficult to compare with a quotation that includes removal, repairs and waste disposal. Ask each contractor to identify what is included and how additional defects discovered during preparation will be handled.

For a fuller explanation, read How Much Does Plastering Cost in London? What Affects Your Quote.

How Much Disruption Should You Plan For?

The practical arrangements can matter as much as the plastering itself.

For an occupied home, discuss which rooms need clearing, access through the property, protection and when each space can be used again. Confirm what you need to move and what the contractor will protect.

For landlords and property managers, coordinate access with occupants or managing agents and allow for drying and decorating before the intended handover.

Businesses may also need to consider staff, customers, deliveries and nearby working areas. Ask whether the project can be divided into phases and what effect that would have on cost and completion.

Agree these arrangements before work starts so that the quotation and programme reflect how the property will actually be used.

Planning Wall Preparation for a Commercial Refurbishment

An office or retail refurbishment may involve several contractors working towards the same handover date.

Brellon’s commercial plastering services can be discussed alongside your wider requirements for access, sequencing and finish.

Include drawings or a scope of work where available, and identify:

  1. Areas remaining occupied during the project.
  2. Electrical, plumbing or partition alterations.
  3. Restrictions on working hours or deliveries.
  4. The surfaces included in the quotation.
  5. The agreed finish and inspection arrangements.
  6. Dependencies before decorating and handover.

The same approach helps builders and developers coordinate multiple rooms or units. Clear boundaries between trades reduce uncertainty about who is responsible for making good.

When Can You Paint After Plastering?

Allow time for the plastering system to dry and for the surface to be prepared for the specified paint.

A thin skim and a deeper repair may dry differently, even within the same room. Materials, background conditions and the indoor environment all influence the programme.

Frequently Asked Questions

Do all walls need skimming before painting?

No. Sound walls with a suitable finish may only need normal decorating preparation. Skimming becomes relevant when the overall surface needs improvement.

Can I repair one wall without replastering the whole room?

Often, the work can be limited to the affected area or wall. The condition of the surrounding plaster and the required finish determine the appropriate scope.

Is skimming cheaper than replastering?

Skimming can involve less work where the background is already suitable. Extensive preparation or repairs can change the cost, so compare the complete scope.

Will skimming straighten an uneven wall?

Skimming improves the surface finish. Significant unevenness may require correction before the finishing coat is applied.

Can plastering be planned around an occupied property?

Discuss occupancy, access and room availability at the quotation stage. The workable arrangements depend on the scope, layout and wider programme.

Do I need to choose the service before contacting Brellon?

No. Explain what you want to achieve, share photographs and describe any known problems. The assessment can establish whether repairs, skimming or more extensive work are appropriate.

Find Out What Your Walls Need Before You Decorate

Whether you are refreshing one room, preparing a rental property or planning a commercial refurbishment, start with a clear assessment of the surfaces.

For projects in London, Essex, Hertfordshire, Cambridge, Cambridgeshire and Surrey, send Brellon your postcode, photographs, approximate dimensions and preferred timescale to discuss your requirements and confirm availability.

Request a plastering quotation so you can plan the preparation, finish and decorating stages with a clearer understanding of the work involved.

Share this article Facebook LinkedIn X WhatsApp
Call Us Request a Quote